COLE HERSEE REVERSING SOLENOID 12 VDC - 24452-BX
Item No. 24452-BX
24452-BX - REVERSING SOLENOID 12 VDC A combination of two solenoids in one package to reduce cost and maximize space savings while also providing simpler wiring. Two integral solenoids provide dynamic braking for permanent magnet motors, when neither coil is energized. This intermittent duty solenoi
Suggested Retail Price $162.58
Price $91.04
excl. tax
0 in stock
Description
24452-BX - REVERSING SOLENOID 12 VDC
A combination of two solenoids in one package to reduce cost and maximize space savings while also providing simpler wiring. Two integral solenoids provide dynamic braking for permanent magnet motors, when neither coil is energized. This intermittent duty solenoid can be used at a variety of amperages.
High performance silver tin oxide contacts assure long cycle life.
A combination of two solenoids in one package to reduce cost and maximize space savings while also providing simpler wiring. Two integral solenoids provide dynamic braking for permanent magnet motors, when neither coil is energized. This intermittent duty solenoid can be used at a variety of amperages.
Features
This module is ideal for tarp or lift applications. It can also be used on hoist, hatches, winches, snowplows, intake/exhaust fans, vehicle outriggers and other reversing applications. When the appropriate control circuit is energized with a pulse it will reverse the direction of the motor.High performance silver tin oxide contacts assure long cycle life.
- 70A at 12Vdc intermittent, max On time 5 mins; Off time 3 mins; 50A at 12Vdc continuous.
- Load current inrush: 150A. Pull-in voltage 7.8V max.
- Low coil current draw. Coil resistance 82Ω ±10%.
- Vibration resistance: 10-55Hz. Double amplitude 1.5mm.
- Environmental: -40C to 85C. Rust and moisture-resistant plastic housing.
- Fully sealed to IP-67 with high strength epoxy for total moisture protection.
- Ignition protected.
- Tin-plated brass studs and hardware for corrosion resistance.
- Dielectric strength: 500V RMS between coil and contact.
- For intermittent operation, control switch should be Mom On-Off-Mom On; for continuous operation On-Off-On.
Specifications
- Brands
- Cole Hersee
Reviews (0)
There are no reviews yet.
COLE HERSEE REVERSING SOLENOID 12 VDC - 24452-BX
Item No. 24452-BX
24452-BX - REVERSING SOLENOID 12 VDC A combination of two solenoids in one package to reduce cost and maximize space savings while also providing simpler wiring. Two integral solenoids provide dynamic braking for permanent magnet motors, when neither coil is energized. This intermittent duty solenoi
Suggested Retail Price $162.58
Price $91.04
excl. tax
0 in stock
Description
24452-BX - REVERSING SOLENOID 12 VDC
A combination of two solenoids in one package to reduce cost and maximize space savings while also providing simpler wiring. Two integral solenoids provide dynamic braking for permanent magnet motors, when neither coil is energized. This intermittent duty solenoid can be used at a variety of amperages.
High performance silver tin oxide contacts assure long cycle life.
A combination of two solenoids in one package to reduce cost and maximize space savings while also providing simpler wiring. Two integral solenoids provide dynamic braking for permanent magnet motors, when neither coil is energized. This intermittent duty solenoid can be used at a variety of amperages.
Features
This module is ideal for tarp or lift applications. It can also be used on hoist, hatches, winches, snowplows, intake/exhaust fans, vehicle outriggers and other reversing applications. When the appropriate control circuit is energized with a pulse it will reverse the direction of the motor.High performance silver tin oxide contacts assure long cycle life.
- 70A at 12Vdc intermittent, max On time 5 mins; Off time 3 mins; 50A at 12Vdc continuous.
- Load current inrush: 150A. Pull-in voltage 7.8V max.
- Low coil current draw. Coil resistance 82Ω ±10%.
- Vibration resistance: 10-55Hz. Double amplitude 1.5mm.
- Environmental: -40C to 85C. Rust and moisture-resistant plastic housing.
- Fully sealed to IP-67 with high strength epoxy for total moisture protection.
- Ignition protected.
- Tin-plated brass studs and hardware for corrosion resistance.
- Dielectric strength: 500V RMS between coil and contact.
- For intermittent operation, control switch should be Mom On-Off-Mom On; for continuous operation On-Off-On.
Specifications
- Brands
- Cole Hersee
Reviews (0)
There are no reviews yet.